innotechvisionPRIVATE LIMITED
Premises Security

Tyre Killers

A tyre killer uses a road-mounted spike mechanism as part of a controlled vehicle access arrangement. The product must be selected around lane direction, operating rules and the site safety plan.

Inside the system

How the system works.

A typical functional arrangement, explained from the first input to the final operating state.

01 / OPERATING FLOW DIAGRAMTyre Killers
Tyre Killers operating flow diagram01Approach the designatedlane02Request permitted movement03Check the movement zone04Retract the spike assembly05Pass through the controlledarea06Restore the designatedcondition
Follow the arrows from 01 to 06. The sequence below explains each stage; the component list identifies the equipment involved.
Key components
  1. C1
    Controlled lane

    Signs and direction control

  2. C2
    Access input

    Reader / operator command

  3. C3
    Control and interlocks

    Checks permitted movement

  4. C4
    Drive mechanism

    Hydraulic or selected drive

  5. C5
    Spike assembly

    Raised / retracted position

  6. C6
    Lane-clear input

    Return-to-state condition

02 / Operating sequence

From input to action.

  1. 01

    Approach the designated lane

    Vehicles follow the signed direction and speed requirements for the installation. The mechanism is not a pedestrian crossing.

  2. 02

    Request permitted movement

    The authorised access workflow sends a command to the tyre-killer control system.

  3. 03

    Check the movement zone

    The controller evaluates the specified detection and interlock inputs before changing the mechanism position.

  4. 04

    Retract the spike assembly

    In an actively controlled installation, the drive mechanism retracts the spikes to provide the permitted passage condition.

  5. 05

    Pass through the controlled area

    The driver proceeds only when the lane indication and operating procedure permit movement. Position indication depends on the selected equipment.

  6. 06

    Restore the designated condition

    After clearance is confirmed, the controller returns the spike assembly to its specified security position.

This explains a typical operating principle, not a specification for a particular model. Final devices, interfaces, safety logic and acceptance criteria are confirmed during project design.

Where it fits

Restricted vehicle lanes where a specified tyre-killer system forms part of the access strategy.

Plan the right configuration

Confirm direction of travel, warning signs, speed control, drainage, foundations and interlocks. Keep pedestrians away from the mechanism.

Completed project note

A practical project perspective.

Tyre killers were included in the premises security tender awarded in April 2024 and completed in December 2024.

Reference: Safdarjung Airport · Apr–Dec 2024

Enter your name, organisation and email to request a download link. No marketing subscription.

Common questions

Before you specify.

What should be included in a tyre killers enquiry?

Confirm direction of travel, warning signs, speed control, drainage, foundations and interlocks. Keep pedestrians away from the mechanism. Include the general site context, intended use and expected timeline.

Are all configurations and capabilities the same?

No. The model, software configuration and integration scope determine the available features. Confirm specifications and acceptance criteria for your project before procurement.